New weather resistant Hardie siding installed and painted
Doors were stripped, sanded, re-stained, and varnished
with a UV resistant spar urethane.
We stripped and re-stained these exterior shutters to seal and protect
them for years to come.
After painting exterior
Before painting exterior
After stain
Before stain. We had cleaned wood to prepare for staining.
These are the "after" pictures of the home below.
These are "before" or "in progress" pictures of a home we
are currently working on. It has a lot of rotted wood siding and trim
that we are replacing. The gray boards are the new boards that we primed
before installation. After we are done with the carpentry we will caulk,
and paint with Sherwin Williams Superpaint.
"After" photos of the exterior painting below
"Before" photos of exterior painting
This house was pink brick before we pressure washed and
painted the brick along with all the siding and shutters. Much of the
siding was replaced (due to rotting) during our prep work.
Exterior Painting
Door was stripped, sanded, stained, and finished with
three coats of UV resistant oil-based spar varnish.
After
Before
After
Before
Wood and caulking were repaired
around windows, columns & door, then repainted to match existing
exterior paint color.
Exterior Painting
Sanded, stained, and varnished
with 2 coats of UV resistant spar varnish
